Search This Blog

Monday 12 November 2012

Edition 4 of IET Code of Practice launched

The long awaitied IET Code of Practice landed on my desk today and cost me £48.40. The previous editions came out in 1994,2001 and 2007; so only 5 years have elapsed since the last edition.

There are a number of changes with the main one "an explanation of the risk based assessment required to determine frequencies between inspection and testing".  Having spent the last few hours reading this document in detail and comparing it with the 3rd Edition, these are my observations on this point. (There will be further posts in the next few days on the other changes).

1.  Table 7.1 has changed. There is the addition of Fixed Equipment to the table. In terms of frequency of testing this mostly fits in between IT and Moveable equipment, with some exceptions. In the main, the periods have been extended - ie more time between inspection and testing. For example, in factories the period for inspecting hand held Class I items has been relaxed from 1 month to 6 months.

2.  There is a whole new section on "risk-based assesments". This uses wordy Health and Safety jargon to pass the responsibility for determining the frequency of inspection and testing to the duty holder. In Edition 3 of the COP this was explained more succintly as follows.

"Table 7.1 provides guidance on initial frequencies of inspection and testing. The frequency of inspection and testing depends on the factors above ie any circumstances that may affect the safety of the equipment".

In my view, the relaxation in Table 7.1 is wholly negated by passing the buck to the duty holder. Any responsible duty holder is going to take a worst case view and test more frequently to be on the safe side of Health and Safety law.

3.   Table 7.1 contains some anomalies.

3.1  If equipment used by the public is of Class I construction, then the advise is to carry out a Formal Visual Inspection weekly. However, if it is of Class II construction, then the advise is to only inspect it every 6 months.  In my view, Class II equipment is likely to develop a frayed cable or a cracked plug just as easily as Class I equipment.

3.2  The same applies for schools with Class I equipment having to be inspected every 6 months, but Class II equipment only every 12 months.

3.3  Items supplied to guests in hotels is to be classed as equipment used by the public. (This was the same in Edition 3). Table 7.1 requires these items, such as hairdryers, fridges and kettles to be formally visually inspected every week and the results recorded !  Most hotels would see their profits disappear in a mountain of paperwork. In my view there was an opportunity to correct this in Edition 4 which has been missed.

In summary, although much seems to have changed in the 4th Edition and I have been parted from my hard earned £48.40, in essence, nothing has changed. It is still upto the duty holder to work out the frequency of inspection and testing in their workplace.

6 comments:

  1. Thank you for a most honest update, and useful observation. I cannot honestly see the justification for such bodies charging astronomically inflated prices for such a small publication. A medical book just purchased hardback with three times more pages is £20 cheaper? I do wonder yet again is this not a greed and revenue based exercise? None the less thank you for a detailed report, much appreciated.

    ReplyDelete
  2. I received copy last week directly from the IET for £55.00, wow!
    I regard the changes as quite positive. I am responsible for PAT in large offices with 95% IT equipment. It is a welcome change that the power cords no longer need be subjected to full testing every 48 months when a recorded visual would suffice. These cords are behind desks and, in most cases, never moved.

    ReplyDelete
  3. Hi Keith, looks like I got a bargain at £48.

    Regarding your point about the Extension leads - there is still a requirement in Edition 4 about user checks and it says (page 51) "if the user cannot routinely disconnect the equipment to facilitate a user inspection, this should be taken into account when determining the frequency of recorded inspection".

    The COP does not tell you explicitly that an inspection every 48 months is the right frequency. It is up to the duty holder to work this out.

    ReplyDelete
  4. A waste of £49, hardly any change, nothing you probably wouldnt find with my friend google. Even if you put the few snippet reports that I have found together, you would get a clear idea of what has been changed or added

    another money making scam

    ReplyDelete
  5. Yet again change for the sake of change because it keeps someone in a job and pension yet idiots like us are having to fork out.
    for a new COP when we are buckling under the cost of having to pay out for BGB, Onsite guide. GN3, PIR,EICR and for what.

    For a COP that is no clearer and still allows the sticker brigade to abuse an industry that has already lost credability

    ReplyDelete
  6. The 4th Edition COP should be available free as a PDF. There is no justification for charging such a lot for it.

    ReplyDelete